HOMEGeneral technical requirements for conveyor
1 mechanical technical requirements
1.1 various conveyor should ensure reliable operation in the range of -20.7 - 39.6.
The welding seam of the 1.2 track should meet the requirement of the second grade of GB3323.
1.3 accurate positioning, in the important position of the repeated positioning accuracy is + 2mm.
1.4 all cover plate spacing is not greater than 5mm.
1.5 of all fittings connecting holes do not allow use of oblong hole adjustment.
1.6 in the context of the provisions of the noise value, according to the driving device around 1 meters measured actual noise should not be greater than 75dB.
All 1.7 materials used on equipment shall not contain silicone components machine.
1.8 all mechanical transmission system technical requirements shall conform to the following national standards:
Code for construction and acceptance of installation of continuous conveying equipment GB50270-98
Code for construction and acceptance of mechanical equipment installation engineering GB50231-98
Code for construction and acceptance of steel structure engineering GB50205-2001.
2 gas (liquid) road
2.1 gas (liquid) road unit should be reliable, no leakage, no shake, no impact.
2.2 gas path unit should be set to a pressure gauge and a pressure relay, when the air pressure is less than 0.4Mpa, the pressure relay should move the conveyor line to stop running, gas path unit configuration silencer.
3 surface treatment
All materials must approach 3.1 by both confirmed rust on the material appearance (14# and above, or by blasting steel I-beam sandblasting processing) after coated with anti rust paint, rust steel under 14# mode do not have mandatory requirements, but must ensure that no steel rust paint before.
3.2 anti rust paint epoxy iron red primer. Finish by domestic famous brands of alkyd enamel paint.
3.3 the appearance of paint requires uniform color (color, pending), no pinhole, blistering and shedding, sagging and leakage of coating defects.
3.4 all covering parts must be level off, and the interface is in order.
3.5 the surface of steel structure such as uneven or scarring, should be polished.
4 equipment safety protection facilities
4.1 the equipment shall be subject to the standards promulgated by the local government, when the safety standards and other standards of this technical specification conflict, safety standards have priority.
4.2 equipment shall be provided with a protective device to avoid contact with the operator's body and equipment.
4.3 in addition to the general operation of the protection measures shall be provided with additional protection devices to protect the operator in the installation and maintenance of the use of a reasonable selection of the lock and control system procedures.
4.4 all safety instructions and safety marks shall be marked with the international symbol, or in Chinese and English, and all safety marks shall be affixed to the bidder in the time of shipment of the equipment.
Ningbo day fish machinery is a professional beer beverage delivery equipment manufacturers.
1.1 various conveyor should ensure reliable operation in the range of -20.7 - 39.6.
The welding seam of the 1.2 track should meet the requirement of the second grade of GB3323.
1.3 accurate positioning, in the important position of the repeated positioning accuracy is + 2mm.
1.4 all cover plate spacing is not greater than 5mm.
1.5 of all fittings connecting holes do not allow use of oblong hole adjustment.
1.6 in the context of the provisions of the noise value, according to the driving device around 1 meters measured actual noise should not be greater than 75dB.
All 1.7 materials used on equipment shall not contain silicone components machine.
1.8 all mechanical transmission system technical requirements shall conform to the following national standards:
Code for construction and acceptance of installation of continuous conveying equipment GB50270-98
Code for construction and acceptance of mechanical equipment installation engineering GB50231-98
Code for construction and acceptance of steel structure engineering GB50205-2001.
2 gas (liquid) road
2.1 gas (liquid) road unit should be reliable, no leakage, no shake, no impact.
2.2 gas path unit should be set to a pressure gauge and a pressure relay, when the air pressure is less than 0.4Mpa, the pressure relay should move the conveyor line to stop running, gas path unit configuration silencer.
3 surface treatment
All materials must approach 3.1 by both confirmed rust on the material appearance (14# and above, or by blasting steel I-beam sandblasting processing) after coated with anti rust paint, rust steel under 14# mode do not have mandatory requirements, but must ensure that no steel rust paint before.
3.2 anti rust paint epoxy iron red primer. Finish by domestic famous brands of alkyd enamel paint.
3.3 the appearance of paint requires uniform color (color, pending), no pinhole, blistering and shedding, sagging and leakage of coating defects.
3.4 all covering parts must be level off, and the interface is in order.
3.5 the surface of steel structure such as uneven or scarring, should be polished.
4 equipment safety protection facilities
4.1 the equipment shall be subject to the standards promulgated by the local government, when the safety standards and other standards of this technical specification conflict, safety standards have priority.
4.2 equipment shall be provided with a protective device to avoid contact with the operator's body and equipment.
4.3 in addition to the general operation of the protection measures shall be provided with additional protection devices to protect the operator in the installation and maintenance of the use of a reasonable selection of the lock and control system procedures.
4.4 all safety instructions and safety marks shall be marked with the international symbol, or in Chinese and English, and all safety marks shall be affixed to the bidder in the time of shipment of the equipment.
Ningbo day fish machinery is a professional beer beverage delivery equipment manufacturers.
